How to Connect a Linksys Wireless Router Without the CD

Setting up a router can be a daunting task. Without prior knowledge, the network might have a faulty connection, and the signal might not be able to reach the intended wireless devices. Moreover, there is also concern about the needed components such as a CD.

Thankfully, Linksys, a prominent company when it comes to churning out network hardware and components; see to it that the installation of their units is convenient and easy to. You do not need the installer ID whenever setting up a Linksys router. You also do not need to be equipped with any third party programs or applications to do the process.

Linksys Wireless Router

In this article, we will teach you how to connect a Linksys Wireless router without the CD.

This tutorial will go into detail the different steps needed to set up a Linksys Wireless router successfully. These steps will apply to virtually every Linksys router.

Routers can be challenging to install especially for those who are not well versed about it. However, these devices are straightforward to install. You need to access the Linksys admin page and then customize the connection settings. The admin page is where you can virtually change and customize the parameters of the device. However, to gain access to this, you need to connect the router to a laptop or a computer via an Ethernet cable.

Step 1

The first step is to check whether the broadband modem or router is working correctly. You can check this by connecting the router to a computer or laptop. If this does not work, you need to inform the Internet Service Provider and ask for assistance.

For a DSL type of connection, you need to gain access to the admin page. With this, you need to input the correct PPPoE username as well as password from the ISP. If you do not know this information, the default username for most routers is “admin,” and the default password is “Password.”

When connecting the router to the computer, you should plug it to the Ethernet port. On the computer, you need to fill the end of the ethernet cable to the internet port. Most routers come with 4 LAN ports and one internet port for modem use. Failure to connect the computer to the modem correctly will lead to an inability to connect to the internet. Most routers also come with LED notification lights which usually notify the power, WAN/LAN connection, Wireless connection, and Ethernet.

Step 2

The next step is to open the Linksys admin router page. To do this, you need to input the IP address of the router. Most Linksys routers come with a default IP address of 192.168.1.1. However, DSL modems may have a unique IP address. With this, you may need to contact your ISP.

After this, check the DHCP IP address on your laptop or computer. Launch the command prompt program and then key in ipconfig and then press enter. This step will reveal the different IP addresses. You need to look for the default gateway of the LAN.

On your computer, launch any browser you have. In the address bar, input the IP address. During this step, you might need to disable your firewall so that you will have full access to the router page.

Step 3

After navigating through the router admin page, you can know to change the internet settings. But before that, you will need to input the username and password. As we mentioned, the default user name is admin, and the default password is “Password.”

After inputting the necessary information, the browser will now present to you the router setup page. The setup page houses different tabs that contain the various customization tools and features that you will be using when installing or changing some settings of the router. Different routers can have different interfaces.

Step 4

The next step is to change the network connecting settings by the protocols of your internet service provider.

For ISPs that offer cable connection, you might need to clone or duplicate the MAC address onto the computer you are using. You can do this, by making use of the router setup page which provides the option to clone the PC MAC address. You should also enable the DHCP server. After doing these steps, click on Save.

For DSL connections, you need to have the PPPoE username and password from your internet service provider. Make the necessary changes to the link and then click on Save.

Step 5

The next step is to try out the connection by browsing through your computer. If the browser is not able to successfully load up a page, then there might be some error in the connection settings.

If you successfully were able to go online, then you need to change the wireless connection settings. To do this, you need to navigate through the wireless tab found on the setup page. With this, it will require you to change the SSID and create a new security password for your wireless network.

Several security profiles come with wireless routers. These are WEP, WPA, and WPA. If you leave your router at WEP/WPA security profile, anyone can connect to your internet connection. However, if you change it to WPA2 with AES encryption, you will be able to equip your home network with more robust security.

Step 6

The last step is to try and connect the new wireless network on other devices. This is the most important yet easiest step in the process. This final step will reveal if you have successfully set up your wireless network.

To connect to the wireless network, you need to first turn on the WIFI network on your computer or smartphone. Go to the WIFI settings and look for the SSID of your home network. Once you have already seen the correct SSID, click on “Connect.” After this, it will require you to key in the correct password. Once the window shows that you have connected successfully to the WIFI network, go to your browser and try to search for a specific page. If the page loads correctly, then you have successfully installed your wireless router without the installer CD.